New Boost Converters Make Greater Use of Energy From Any 1.5V Cell
New at Dengrove Electronic Components, RECOM R-78S boost switching regulators enable designers to power devices such as microcontrollers, radio modules, or energy-conscious IoT systems at up to 100mA for long periods from a single 1.5V cell.
The 0.33W R-78S regulators ensure longer lifetime by maintaining a stable 3.3V output as the battery discharges as low as 0.65V. This wide input-voltage range enhances flexibility to use alkaline, NiCd, NiMH, zinc-carbon or lithium cells. The converters are also extremely energy efficient, operating at up to 93% efficiency at full load and over 80% at lighter loads. No-load current consumption is 160μA, and can be reduced to 7μA by using the control pin.
The new boost converters deliver the same plug-and-play convenience of the RECOM R-78 buck series, and integrate continuous short-circuit protection with auto-recovery, over-temperature protection, and under-voltage lockout to prevent deep discharge of rechargeable cells. They are specified for operation in ambient temperature range from -40°C to +100°C, certified to the new EN62368-1 standard, and housed in a UL94V-0 plastic SIP4 package only 11.6mm x 8.5mm wide and 10.4mm tall. All units are covered by a three-year manufacturer’s warranty.
Datasheet Downloads
Contact Dengrove
So if you’re looking for Power Switching Regulators components for your next project, and you want a supplier with great customer service and the knowledge, experience and technical skills, then contact Dengrove today.
Call us. 01525 237731
Email us. sales@dengrove.com